Protective housings with 8-pin or male-type MBRE connectors for a wide range of control applications.

The freedom of design choice is provided by two different depth options and the presence of guide grooves in the cover.

The upper part of the protective housing is made of ABS material, and the base is made of noril.

• RAL cap code: 7035
  
• RAL case code: 9005
  
• Cover Material: ABS
  
• Case Material: Noril
  
• Constant operating temperature max. (° C): 60
  
• Constant operating temperature min. (° C): -20
  
• Suitable for indoor use
  
• IP rating: 43
  
• Special colors

The MBZA plug-in card housings with gold-plated contacts allow direct contact between the circuit board and the terminal.

These enclosures are used in a variety of applications for small control systems. The housing cover is made of polystyrene, and the base is made of fiberglass reinforced polyamide.

The following alternatives are available:

• 2-pole = MBZA 12 = 12 pins
• 16-pole = MBZA 16 = 16 pins
• RAL cap code: 7035
• RAL case code: 9005
• Cover Material: Polystyrene
• Case Material: Polyamide
• Constant operating temperature max. (° C): 80
• Constant operating temperature min. (° C): -40
• Suitable for indoor use
• IP rating: 40

HOUSING FOR KNOBLES COUNTERS MBRC2 FOR KNOWLEDGE

The new protective housing for MBRC2 controller boards has an increased connection space and provides a degree of protection of IP 65.

Another advantage is the hinged membrane panel, which can also be protected with a transparent cover.

Six different versions of the cover provide ample opportunities for use in control systems and instrumentation.

• K = transparent cover
• F = membrane cover
• FK = membrane cover and transparent cover
• R = frame
• RA = frame with aluminum front panel
• RG = frame cover closed
  
• RAL cap code: 7035
• RAL case code: 7035
• Cover Material: ABS
• Case Material: ABS
• Seal Material: PU
• Screw material: V2 A stainless steel
• Constant operating temperature max. (° C): 80
• Constant operating temperature min. (° C): -40
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

HOUSING FOR MBRC2 COUNTERS WITHOUT KNOCK-OUT FOR FLYING

The new protective housing for MBRC2 controller boards has an increased connection space and provides a degree of protection of IP 65.

Another advantage is the hinged membrane panel, which can also be protected with a transparent cover.

Six different versions of the cover provide ample opportunities for use in control systems and instrumentation.

• K = transparent cover
• F = membrane cover
• FK = membrane cover and transparent cover
• R = frame
• RA = frame with aluminum front panel
• RG = frame cover closed
• RAL cap code: 7035
• RAL case code: 7035
• Cover Material: ABS
• Case Material: ABS
• Seal Material: PU
• Screw material: V2 A stainless steel
• Constant operating temperature max. (° C): 80
• Constant operating temperature min. (° C): -40
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

Practical protective enclosures for controller boards of the MBRCA type, made of fire-resistant and impact-resistant polystyrene, are especially suitable for small control devices and are used in instrumentation and automation.

These cases have two functional compartments and an opening front side with a recess on the edge for mounting the aluminum front panel.

If there are separate connections for the compartment covers, free access to the connection leads is possible.

7xM3 threaded connectors are provided for mounting printed circuit boards or assembly plates inside.

• Cover color description: transparent
• Body Color Description: Light Gray
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: Polystyrene
• Material front panel: aluminum
• Seal Material: Chloroprene CR
• Constant operating temperature max. (° C): 60
• Constant operating temperature min. (° C): -20
• Suitable for indoor use
• IP rating: 40
• Degree of protection with additional IP seal: 54
• captive screws
• Special colors

Housings for connectors with different connector options, made of flame-retardant and impact-resistant polystyrene, are often used for industrial power supplies and chargers.

Schuko connector options are available as custom options, with European, Swiss, and French formats.

Excellent stability is achieved through the use of a groove and spring seal, and base parts that open laterally allow quick and easy assembly of structural components.

The cover is screwed in invisibly on the underside as standard.

Alternatively, it is also possible to fasten the lid on top.

• ST * = connector without ground
  
• STE * = Schuko ground connector
  
• ST CEE * = French-style grounding connector
  
• ST CH * = Swiss format grounding connector
  
• ST EURO * = European-style connector without grounding
  
• DO * = Schuko ground socket
  
• DO CEE * = French-style earthing plug socket
• RAL cap code: 7035
  
• RAL case code: 7012
  
• Cover Material: Polystyrene
  
• Case Material: Polystyrene
  
• Constant operating temperature max. (° C): 60
  
• Constant operating temperature min. (° C): -20
  
• Suitable for indoor use
  
• IP rating: 20
  
• Self-extinguishing: V0
  
• Special colors

Housings of the MBPO type with an elegant design made of impact-resistant polystyrene are especially suitable for “packing” small control devices and desktop units.

Excellent stability is achieved through the use of a groove and spring seal, and base parts that open laterally allow quick and easy assembly of structural components.

The cover is screwed in invisibly on the underside as standard.

Alternatively, it is also possible to fasten the lid on top.

• RAL cap code: 7035
  
• RAL case code: 7012
  
• Cover Material: Polystyrene
  
• Case Material: Polystyrene
  
• Constant operating temperature max. (° C): 60
  
• Constant operating temperature min. (° C): -20
  
• Suitable for indoor use
  
• IP rating: 20
  
• Special colors

ALPHA-BOX enclosures made of ABS material are modern design enclosures designed to accommodate functional electronic equipment.

This product features a variety of assembly options for hosting printed circuit boards and other electronic components.

• RAL cap code: 9010
  
• RAL case code: 9010
  
• Cover Material: ABS
  
• Body Material: ABS
  
• Screw material: V2 A stainless steel
  
• Constant operating temperature max. (° C): 80
  
• Constant operating temperature min. (° C): -40
  
• Suitable for indoor use
  
• IP rating: 65
  
• Seamless foamed seal
  
• captive screws
  
• Special colors

MACRO-TAST keyboard enclosures with aluminum front plate are used for various tasks related to control and information display technologies.

Chassis are available in either polycarbonate or ABS material.

• RAL cap code: 7035
• RAL case code: 7035
• Color Description Front Panel: Anodized Silver
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Material front panel: aluminum
• Seal Material: PU
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

A Duo-Box case is a case with two different functional areas.

For example, electronic components can be separated from electrical devices.

These enclosures are supplied either made of polycarbonate or ABS.

As optional options, Duo-Box enclosures can be delivered with a transparent cover (K).

• RAL cap code: 7035
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Seal Material: PU
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

Cases made of ABS material with a recess for the film have excellent properties for the "packaging" of electronic and electrical components, as well as for fully equipped control systems installed in enclosed spaces.

Our enclosures can be machined, and there are practically no restrictions to ensure surface design in accordance with individual customer requirements, such as screen printing and membrane keyboards.

• RAL cap code: 7035
  
• RAL case code: 7035
  
• Cover Material: ABS
  
• Case Material: ABS
  
• Seal Material: PU
  
• Screw material: V2 A stainless steel
  
• Constant operating temperature max. (° C): 80
  
• Constant operating temperature min. (° C): -40
  
• Suitable for indoor use
  
• IP rating: 65
  
• Seamless foamed seal
  
• captive screws
  
• Special colors

By releasing multi-color protective cases made of ABS, we offer you the opportunity to choose a color design for the products you purchase and update it even for small quantities of products.

Multi-color enclosures have excellent properties for “packaging” electronic and electrical components, as well as for fully-equipped control systems installed in enclosed spaces.

Our enclosures can be machined, and there are practically no restrictions to ensure surface design in accordance with individual customer requirements, such as screen printing and membrane keyboards.

These enclosures come with colored or transparent covers (K).

• Constant operating temperature max. (° C): 80
  
• Constant operating temperature min. (° C): -40
  
• Suitable for indoor use
  
• IP rating: 65
  
• Seamless foamed seal
  
• captive screws

ABS HOUSING TYPE MBT / GRAY COVER

MBT enclosures have excellent properties for “packaging” electronic and electrical components, as well as for fully equipped control systems installed in enclosed spaces.

Our MBT-type enclosures can be machined and there are virtually no restrictions to ensure surface design according to individual customer requirements, such as silk-screen printing and membrane keyboards.

These enclosures come with gray covers and transparent covers (K).

• RAL cap code: 7035
• RAL case code: 7035
• Cover Material: ABS
• Case Material: ABS
• Seal Material: PU
• Screw material: V2 A stainless steel
• Constant operating temperature max. (° C): 80
• Constant operating temperature min. (° C): -40
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
  
• captive screws
  
• Special colors
  

ABS HOUSING TYPE MBT / TRANSPARENT COVER

MBT enclosures have excellent properties for “packaging” electronic and electrical components, as well as for fully equipped control systems installed in enclosed spaces.

Our MBT-type enclosures can be machined and there are virtually no restrictions to ensure surface design according to individual customer requirements, such as silk-screen printing and membrane keyboards.

These enclosures come with gray covers and transparent covers (K).

• Cover color description: transparent
• Body Color Description: Light Gray
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: ABS
• Seal Material: PU
• Screw material: V2 A stainless steel
• Constant operating temperature max. (° C): 80
• Constant operating temperature min. (° C): -40
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

POLYCARBONATE PROTECTIVE HOUSING TYPE MBM / GRAY COVER

MBM enclosures have superior packaging properties for electronic and electrical components, as well as fully-equipped control systems.

Due to the high degree of resistance of the material to ultraviolet radiation, these enclosures can be used for equipment installed both indoors and outdoors.

Our MBM-type enclosures can be machined and there are practically no restrictions to ensure surface design according to individual customer requirements, such as silk-screen printing and membrane keyboards.

These enclosures come with gray covers or with transparent covers (K).

• RAL cap code: 7035
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Seal Material: PU
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

POLYCARBONATE PROTECTIVE CASES TYPE MBM / TRANSPARENT COVER

MBM enclosures have superior packaging properties for electronic and electrical components, as well as fully-equipped control systems.

Due to the high degree of resistance of the material to ultraviolet radiation, these enclosures can be used for equipment installed both indoors and outdoors.

Our MBM-type enclosures can be machined and there are practically no restrictions to ensure surface design according to individual customer requirements, such as silk-screen printing and membrane keyboards.

These enclosures come with gray covers or with transparent covers (K).

• Cover color description: transparent
• Body Color Description: Light Gray
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Seal Material: PU
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 65
• Seamless foamed seal
• captive screws
• Special colors

MBP cases meet the high requirements for equipment in mechanical engineering, shipbuilding and in the petrochemical industry.

In addition to being highly resistant to most solvents and acids, glass fiber reinforced polyester is a non-combustible, self-extinguishing material.

Such enclosures are preferably used as junction boxes or enclosures for command and information devices in chemically aggressive environments, such as refineries or road tunnels.

• RAL cap code: 7001
• RAL case code: 7001
• Cover Material: GRP Polyester
• Body Material: GRP Polyester
• Seal Material: EPDM
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 110
• Constant operating temperature min. (° C): -40
• Constant operating temperature with special sealing max. (° C): 140
• Constant operating temperature with special sealing min. (° C): -50
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 66
• Self-extinguishing: V0
• captive screws

PROTECTIVE HOUSING FROM POLYCARBONATE MBX PRO

MBX PRO is one of the most durable standard plastic housings on the market, specially designed for use in industrial and outdoor applications. 10 sizes compatible with well-known standard aluminum enclosures.

Dust, water, heat, cold or mechanical shock is not a problem! 10 types of enclosures are made of the newly developed shockproof and weatherproof polycarbonate material in silver gray RAL 7001, which corresponds to a self-extinguishing level in accordance with UL94V-0 / 5VA. The cover screws are made of stainless steel. The MBX PRO Series is superior to all aluminum enclosures, especially in applications with an increased risk of corrosion.

Thanks to the seamlessly foamed 2-component polyurethane gasket, all types are IP69 rated. The housings can easily withstand high-pressure jets of water, steam cleaning or short-term flooding. Therefore, they are ideally suited for use in the automotive industry, agricultural machinery, plant construction and other areas of increased corrosion. In addition, the enclosures comply with DIN EN 45545-2 for railway applications.

• RAL cap code: 7001
• RAL case code: 7001
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Seal Material: PU
• Screw material: V2 A stainless steel
• UL listed material
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 69, 66
• Impact Strength IK: 10
• Self Extinguishing: V-0 / 5VA
• Seamless foamed seal
• captive screws

MBX BASIC POLYCARBONATE PROTECTIVE CASES

Polycarbonate MBX BASIC enclosures have been specifically designed for industrial applications. 10 sizes are compatible with well-known standard aluminum enclosures and represent a cost-effective alternative. The MBX BASIC Series is superior to all aluminum enclosures, especially in applications with an increased risk of corrosion. The gray polycarbonate material RAL 7035 is weatherproof and absolutely corrosion free.

Thanks to the seamlessly foamed 2-component polyurethane gasket, all types are IP69 rated. The housings can easily withstand high-pressure jets of water, steam cleaning or short-term flooding.

• RAL cap code: 7035
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Seal Material: PU
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 69, 66
• Impact Strength IK: 08
• Self-extinguishing: V2
• Seamless foamed seal
• captive screws

POLYCARBONATE PROTECTIVE CASES TYPE MBX BASIC / TRANSPARENT COVER

MBX BASIC enclosures with transparent polycarbonate covers have been specifically designed for industrial applications. 10 sizes are compatible with well-known standard aluminum enclosures and represent a cost-effective alternative. The MBX BASIC Series is superior to all aluminum enclosures, especially in applications with an increased risk of corrosion. The standard gray RAL 7035 polycarbonate material is weatherproof and absolutely corrosion free.

Thanks to the seamlessly foamed 2-component polyurethane gasket, all types are IP69 rated. The housings can easily withstand high-pressure jets of water, steam cleaning or short-term flooding.

• Cover color description: transparent
• Body Color Description: Light Gray
• RAL case code: 7035
• Cover Material: Polycarbonate
• Case Material: Polycarbonate
• Seal Material: PU
• Screw material: V2 A stainless steel
• UV resistant
• Constant operating temperature max. (° C): 100
• Constant operating temperature min. (° C): -40
• Suitable for outdoor use.
• Suitable for indoor use
• IP rating: 69, 66
• Impact Strength IK: 08
• Self-extinguishing: V2
• Seamless foamed seal
• captive screws